| Pos. | Part No | Qty | Parts name | Comments |
| 1 | G107039 | [2] | CYLINDER ASSY. | CAS CYLINDER ASSEMBLY - bucket, 4 (102) ID x 36-1/4 inch (921 mm) stroke, Includes: Ref. 1 - 19 |
| 1 | G107040 | [1] | TUBE,4" DIA x 56.92" L | CAS - cylinder |
| 2 | D33678 | [2] | BUSHING,51.02mm ID x 63.5mm OD x 22.3mm L | CAS - 2 (51) ID x 7/8 inch (22 mm) long, tube |
| 3 | 1543019C1 | [1] | CYLINDER END CAP | IH GLAND - cylinder |
| 4 | G102569 | [1] | PLUG | CAS - nylon, thread-locking, gland, if used |
| 4A. | NSS | [1] | NOT SOLD SEPARAT | CON RETAINING RING - bushing, if used |
| 5 | D95144 | [1] | WIPER SEAL,50.77mm ID x 63.52mm OD x 7.92mm Thk | CAS Wiper - piston rod |
| 6 | G101533 | [1] | WEAR RING,Split, 50.8mm ID x 53.87mm OD x 25.15mm Thk | CAS BUSHING - center |
| 7 | G107923 | [1] | SEAL,50.77mm ID x 63.63mm OD x 10.69mm Thk | CAS - U-cup, piston rod, wide, with O-ring |
| 7 | G100778 | [1] | SEAL | CAS - U-cup, piston rod, service option - severe heat or cold |
| 8 | G107997 | [1] | SEAL,50.37mm ID x 63.68mm OD x 3.05mm Thk | CAS - buffer, piston rod, narrow |
| 9 | 238-5242 | [1] | O-RING,0.139" Thk x 3.984" ID, -242, Cl 5, 75 Duro | CAS Superseded by part number: 87421147 |
| 10 | G32176 | [1] | BACK-UP RING,101.22mm ID x 107.32mm OD x 1.4mm Thk | CAS Gland |
| 10 | 276-2446 | [1] | SELF-TAP SCREW,Hex Hd, #8 x 3/8" | CAS SCREW - self-tapping, hex hd, No. 8 NC x 3/8 ", slotted Superseded by part number: 86642312 |
| 11 | G107046 | [1] | PISTON ROD | CAS ROD - piston, 2 inch diameter, Includes: Ref. 12 |
| 12 | D33024 | [2] | BUSHING,51.02mm ID x 63.5mm OD x 25.4mm L | CAS - 1 inch (25 mm) wide, piston rod |
| 13 | G100438 | [1] | PISTON,100.89mm Bore, 32.8mm Rod, 50.7mm W | CAS - cylinder |
| 14 | G102285 | [1] | SEAL,Locking, 98.55mm ID x 102.97mm OD x 6.96mm Thk | CAS - piston |
| 15 | G100440 | [1] | RING,Square, 5.28mm Thk x 88.01mm ID | CAS - backup, piston seal |
| 16 | G100448 | [2] | RING,101.6mm OD, Ext | CAS - wear, piston |
| 17 | 28-2044 | [1] | BOLT,Hex, 1-1/4" - 12 x 2-3/4", Gr 8 | CAS - Hex, 1-1/4"-12 NF x 2-3/4", G8 |
| 18 | G104989 | [1] | WASHER,34.29mm ID x 60.3mm OD x 4.78mm Thk | CAS - flat, hardened, special |
| 19 | 219-1 | [2] | LUBE NIPPLE,1/8" - 27 NPTF | CAS FITTING - grease, straight, 1/8 PT x 21/32 inch Superseded by part number: 80710 |
| . . | 1543273C1 | [1] | SEAL KIT | IH KIT - seal, includes Refs. 5 - 10 (except G100778), & 14 - 16 |
